Products
Scattered Light Polariscope
Products
SCALP-05
Scattered Light Polariscope
A compact scattered light polariscope for depth-wise stress measurement in sheet glass.
SCALP-05 is a compact scattered light polariscope for depthwise stress measurement in sheet glass. SCALP-05 contains diode laser, optics and camera. Recording of the data and stress calculation is done by PC, connected over USB. Handling of the polariscope is simple – clean the glass, apply a drop of immersion liquid, place SCALP onto the same spot and click the start button in software. After 3 seconds, the stress profile is shown on the screen of PC.
This instrument is suitable for measuring architectural glass, solar pv (photovoltaic) glass, and automotive glass.
Measurable Objects
Tempered Glass: Semi-tempered glass, Heat reinforced glass, Annealed glass, Float glass
Borosilicate Glass: Soda - lime glass, Quartz glass (non - fused quartz), Tinted glass
Flat Glass, Curved Glass: Flat glass, Curved glass (such as automotive glass), Patterned glass
Suitable for Measuring Architectural Glass
Suitable for Measuring Solar PV Glass
Suitable for Measuring Automotive Glass
Functions
Air Side
Tin Side
Patterned Side
Features
Dynamic polarized laser
Beam technology
Field measurement
Installed glass measurement
Simple operation
Parameters
| Item | Parameters |
|---|---|
| Dimensions (L*W*H) | 56*28*76 mm |
| Weight | 177 g |
| Communication interface | USB 2.0 |
| Power supply | USB bus |
| Power consumption | 1.0 W |
| Laser wavelength | 635 nm |
| Laser output power | 5 mw |
| Sensor resolution | 1280*1024 pixels |
| Software requirements | Windows 10, .NET 4.6 |
| Measurable glass | Flat and curved glass (r > 300 mm) |
| Measurable surface | Air and tin side |
| Item | Parameters |
|---|---|
| Minimum measurable thickness | > 1 mm |
| Maximum measurable depth | 6 mm (on glass with any thickness) |
| Measurement time | 1~6 seconds, default 3 seconds |
| Minimum surface stress | 1 MPa |
| Maximum stress | Not limited |
| Humidity | 0 ~90 % R.H. (non-condensing) |
| Ambient light | Direct sunlight must be avoided |
| Calibration | Calibrated by manufacturer |
| Precision | ±1 MPa (surface stress 4 MPa) >5% (surface stress >4 MPa) |
| Operating conditions | +10 … +50 °C (with some thermal isolation down to -10 °C) |
Remark: Aoptek reserves the right to modify the information, the actual instrument & manual be as final.
AOPTEK - OVER 30 YEARS OF EXPERIENCE
Explore Our Products
Contact Us NOW !
Aoptek can provide comprehensive solutions for glass
measurement and offer the best post-sales service.
